PORCELAIN TILES ADHESIVE C2 TE

Composition

Product based on high resistance cement, selected aggregates, additives and synthetic resins,
which give excellent bonding, good workability and resistance to ageing.

Features and applications

• To be applied on interior walls and floors or on exterior floors.
• Suitable for all types of ceramic tiles.
• No need to wet tiles or substrates thanks to its high water-retaining capacity.
• Non slip. Excellent initial adherence.
• Long open time. Allows rectification.
• Superb adherence and correct setting with low-porosity materials such as porcelain stoneware.
• Specially recommended for setting head to head tiles.
• Swimming pool facings.

Substrates

• Conventional cement-based substrates.
• Indoor ceramic cladding and flooring.
• Ceramic flooring.
• Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
• All substrates must have the appropriate flatness. Otherwise, smooth down up to 5 mm with the same product 48 hours prior to bonding. For greater thickness, use traditional dry mortars or levelling paste. In case of greater thickness should be used:In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappears.
  • On floors: Depending on the particular need use 10R NIVELAND 10 R or PAVILAND RECRECIDO AUTONIVELANTE.
  • On walls: mortars with adequate tensile strength with drying shrinkage already completed.
• Do not apply on clay, paint or on elements prone to disintegrate.
• On ceramic floorings, remove poorly adhered pieces and refill gaps with mortar one day prior to applying the product.