Morcem® Estuco Extrafino CR W0

Composition

Aerial lime based product, with balanced grain size distribution aggregates and other additives.

Features and applications

• High adherence.
• To be applied indoors and outdoors.
• No paints necessary. Excellent façade finishes.
• Environmentally friendly, this product is included in the "Green Line".

Substrates

Should always be applied over a smooth base of MORCEM FINE STUCCO.

Instructions for use

• Add water and mix by hand or mechanically until it takes on an even and workable consistency and lump-free.
• Apply MORCEM STUCCO EXTRA FINE over a smooth base of MORCEM FINE STUCCO.
• Spread the mixed product.
• The paste is spread using a steel trowel, leaving a thickness less of 1 mm.
• Smooth out the surface with a steel trowel until a shiny texture is obtained.

Cautions and recommendations

• Do not apply directly on the wall (brick, concrete block, etc) given that the purpose of this material is strictly decorative and must be always applied over MORCEM STUCCO THIN.
• Do not apply below 5ºC nor above 30ºC.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
• It is not advisable to apply on horizontal or sloped surfaces.
• The application of IMPERMOR is recommended on exteriors.