Morcemcril® Flexible

New

Ready to use synthetic-mineral render with elastic properties. Suitable for waterproofing and decorating façades and indoor walls. It has highly hydrophobic surface to avoid any absorption of humidity and reduces dirt pick-up. Decorative finish for the external thermol insulation system TRADITERM®. (ETICS).

Price per 20kg/pc.

More details

Quantity 999

72,15 €

72,15 € per saco

Add to wishlist

More info

Composition

Product based on acrylic resin with internal and UV reticulation, mineral aggregates, pigments, and organic and inorganic additives.

Features and applications

  • Elastic.
  • Strongly hydrophobic surface.
  • Impermeable to water.
  • Water vapour permeable.
  • Anti-mould and anti-dirt pick-up.
  • Crack bridging up to 2 mm.
  • Easy and fast application.
  • Float, textured finishes.
  • Compatible with most substrates.
  • Weather resistant.
  • Resistant to aging, city atmospheres and UV radiation.
  • Excellent adherence usual construction substrates. 
  • Washable.

Substrates

  • Compatible with mortars, concrete, one coat mortars, plaster, plasterboard and old painted surfaces.
  • Not compatible with fresh lime renderings, resins or varnish, distempered, lime or silicate paints.
  • Substrates must be sound clean, free from dust, loose particles, old paints, oils, etc.
  • Une FIJAMOR as a primer on low cohesion substrates. Always prime with FONDO MORCEMCRIL. 

Instructions for use

  • Stir until material is homogeneous.
  • The product is ready to use with trowel or spray gun.
  • When trowel applicated workability can be adjusted by adding water (up to 250 ml per 20 kg buckets). For spray gun, up to 1 litre per 20 kg buckets may be added. Depending on the pump used. Mix carefully just before using. 
  • Apply with a steel trowel and when the surface is no longer sticky floot with the trowel.
  • Clean tools with water immediately after use. Remove dry remains with paint thinner 
  • Texture: Medium. 

Cautions and recommendations

  • Do not apply in temperatures below 5°C, or above 30°C, under direct sun, rain, or if risk of frost.
  • Do not apply to horizontal (floors) or sloped less than 45´ surfaces.
  • Protect the upper parts of the render against rain.
  • To avoid small colour variations order all the necessary product in a single order and do not mix different batch numbers in a single area.
  • When using a spray gun, keep pressure, angle and wall constants to avoid finish variations thoroughly.
  • Protect the surrounding area thoroughly. Clean with water any spillage before driying.

Packaging

MORCEMCRIL FLEXIBLE is sold in 20 kg plastic buckets. Product supplied only to order. Shelf life 2 years in original, sealed packaging, stored in a fres and dry place. Avoid exposure to direct sun, frost and temperatures lower than 5ºC o or higher than 35ºC.