Morcemcril® Mosaico

Composition

Product based on acrylic resins, crushed natural stone, mineral pigments and organic and inorganic additives.

Features and applications

• Ready to use.
• High surface hardness.
• Resistant to weather conditions.
• Resistant to mold and algae.
• Waterproof.
• Permeable to water vapor, allowing the substrate to breathe.
• Quick and simple application.
• Compatible with most substrates.
• Resistant to aging, city atmosphere and UV radiation.
• Excellent adhesion to usual construction surfaces.
• Washable.
• Ideal for dealing with the area of skirting boards (baseboards) and frames around windows and doors in façades.

Substrates

• Compatible with mineral mortars, concrete, one-coat mortars and plasters.
• TRADITERM external thermal insulation system ready for the application of the final decorative finish.
• Not compatible with fresh lime renders, resins or varnishes, distemper, lime or silicate paints, on substrates that are already painted.
• The substrates must be sound clean, free of dust, loose particles, residues of old paints, oils, etc.
• Use FIJAMOR as primer on low cohesion substrates. Always prime with FONDO MORCEMCRIL.

Instructions for use

• Mix until the material is homogenous.
• The product is ready to use, applications with a stainless steel trowel.
• Spread the product on the substrate, and pass the trowel successively over the applied surface, always in the same direction, to get a flat surface completely covered by MORCEMCRIL MOSAIC.
• Clean work tools with water immediately after use. Remove dry remains with turpentine paint solvent.

Cautions and recommendations

• Do not apply at temperatures below 5ºC or above 35ºC, under direct sunlight, rain or risk of frost.
• Do not apply on horizontal substrates (floors) or sloped less than 45º.
• Protect the upper part of the render to avoid rain water penetration.
• To avoid small colour variations order all the necessary product in a single order and do not mix different batch numbers in a single working area.
• When using spray gun keep pressure, and wall distance constants to avoid finishing variations.
• Protect surrounding areas thoroughly. Clean with water any spillage before dryng.

Packaging

MORCEMCRIL is sold in 20Kg plastic buckets.

Shelf life: 2 years in sealed original packaging, store in fresh and dry places. Avoid exposure to temperatures below 5ºC or above 30ºC. Sheltered from weather conditions.