Grout GREY, 3kg/Bag ( Joints Mortar )

Composition

Product based on high resistance cement, high refinement aggregates, pigments and special additives.

Features and applications

• High resistance to abrasion.
• Extra Fine particle granulonetry.
• High hardness.
• Easy to clean.
• Very fine texture.
• Low water absorption.
• Cracking resistant.
• To be applied indoors and outdoors.
• No scratching.

Substrates

• Empty joints must be dry and clean in all their length and depth.
• Grouting must be carried out at least 24 hours after tile setting on walls or 48 hours after tile setting on floors.
• Before starting the application, temporary porefiller PROTECMOR protects porous and non-porous ceramic from possible pigment stains.

Instructions for use

• Add water and mix by hand or mechanically until you have an consistent paste (non liquid).
• Let the mixture stand for 5 minutes and remix.
• When working in small areas, grout the joints with a rubber trowel or rechargeable grouting gun, pressing on the paste the material firmly.
• The mixture must be applied diagonally to the joints pressing the mixture onto the joints and removing the excess.
• Let the material dry slightly for 20-30 minutes. When the mixture becomes dull, you can clean the surface with a hard, slightly wet sponge. 
• Polish the surface by using a clean dry cloth to remove dust only when the product has hardened in the joint.
• Let dry for at least 24 hours before normal traffic.
• Use DESMOR to clean up stained tiles. Make sure the product does not damage the tile. Do not use on grouted joints.