Morcemcolor® Epoxy RG

Composition

2 part epoxy sealer composed by a resin and a hardener.

Features and applications

• Allow 12 hours before stepping in. Can hold mechanical loads 24 hours after setting.
• When cured it will resist salty water, acids, organic liquids, mineral compounds, etc. 
• Solid colour. Easy to clean.
• High resistance.
• Good penetration in joints.
• Suitable for joints of 2-15mm.
• Swimming pools, chemical or food industries, laboratories, hospitals, abbatoirs, industrial kitchens, etc.

Substrates

• Empty joints must be dry and clean in all their length and depth.
• Wait 24 hours after wall application and 48 hours after floor application.

Instructions for use

• Mix energically both components (best with a drill mixer) until a uniform and homogeneous paste is obtained.
• Do not mix partially.
• Use a spatula or a rubber trowel to grout and to press the material. Application should be diagonally to the joints.
• Remaining material must be discarded within 75 min with a hard sponge and water. Then a soft sponge can be used.
• Any light remains on the tiles should also be cleaned out.

USE AS AN ADHESIVE

• Also suitable to fix glass/porcelain mosaic on walls and floors as well as for ceramic tiles on floors.
• Complies with EN 12004 standards when used as an adhesive.