PEGOLAND PROFESSIONAL JOINT CG2 GRAY 3KG

Composition

Base product of special binders (not containing portland cement), high purity select aggregate, pigments, synthetic resins, special fibres and additives of the latest technology.

Features and applications

• Grout for paving and coating, interior and exterior, for all kinds of ceramic parts, grey porcelaine, marble, granite, glass mosaic, natural stone.
• Grouting of places with heavy traffic, residentials, pools, facades, balconies, terraces, floors with underfloor heating.
• Aquastop effect: repels the surface water on the joint provoking a pearl effect, its low porosity surface with minimum water absorption, allows for the joint to be cleaned very easily.
• Hygienic grout including BIOACTIVE TECHNOLOGY which stops the spread of microorganisms (fungi and algae) in damp climates. It is also a bacteriostatic grout, being an inert medium which stops the growth of bacteria on its surface.
• Mortar that stops the suspension of dust particles in the air. low VOC emission.
• Quick and easy cleaning during its application with a quick, optimum finish.
• Grout resistant to cracking and fissures, because of its low shrinkage and great durability, thanks to its great resistance to abrasion and high mechanical resistance, including in freeze/thaw cycles.
• Even colours, thanks to a technology that blocks the saline efflorescence. It doesn't contain portland cement: consequently, in the hydration of the product, calcium hydroxide crystals which generate efflorescence are not produced, avoiding this unwanted effect in colour and finishing for the joint.
• UV ray and exposure resistant colours on the outside.
• Great resistance to oils, solvents, alkali and acids of a pH>3.
   

Substrates

• Before applying the grout, wait for the adhesive to be completely hardened, checking that the waiting time indicated in its data sheet has passed.
• The empty joints must be dry and clean, without dust or remnants of adhesive in all its length and depth. They must have a even depth, a minimum of 2/3 of the total thickness.
• Some ceramic tiles may show micropores or surface roughness. It is recommended that a preliminary test is carried out to verify if it can be cleaned and, when necessary, apply PROTECMOR temporal pore covers on the surface to avoid possible pigment stains penetrating the surface of the tiles.